Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
2
Rear brakes
⇒ "2.1 Assembly overview - rear brakes", page 56
⇒ "2.2 Removing and installing brake pads", page 58
⇒ "2.3 Removing and installing brake caliper, rear brake",
page 62
⇒ "2.4 Removing and installing brake disc", page 66
⇒ "2.5 Removing and installing brake shield plate", page 67
2.1
Assembly overview - rear brakes
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after
♦
removal.
Observe the instructions for changing the pad
♦
⇒ "2.2.1 Changing the brake pads of the rear brake - Mounting instructions", page 58
Brake inspection
⇒ "4 Brake inspection", page 7
♦
After replacing the brake pads, depress brake pedal firmly several times when the vehicle is stationary to
♦
ensure the brake pads are properly seated in their normal operating position.
Use the brake filling and bleeding device , e.g. -VAS 5234- , to drain the brake fluid from the brake fluid
♦
reservoir.
Use the brake pedal load , e.g. -V.A.G 1869/2- , before removing a brake calliper or separating a brake hose
♦
from the brake calliper.
56
Rep. gr.46 - Brakes - mechanism
.