Skoda Kodiaq 2017 Workshop Manual page 20

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
1 - ABS control unit - J104-
❑ Removing and installing
⇒ "3.2 Removing and in‐
stalling ABS control unit
J104 / ABS hydraulic
unit N55 ", page 19
❑ Disconnecting the con‐
trol unit from the hy‐
draulic unit
⇒ "3.3 Disconnecting
the control unit from the
hydraulic unit",
page 34
❑ Fitting the control unit to
the hydraulic unit
⇒ "3.4 Fitting the control
unit to the hydraulic
unit", page 35
2 - ABS hydraulic unit - N55-
❑ Removing and installing
⇒ "3.2 Removing and in‐
stalling ABS control unit
J104 / ABS hydraulic
unit N55 ", page 19
3 - Screw
❑ tighten Torx screw in 2
stages alternately on af‐
ter the other
❑ 1st level: Preliminary
tightening torque: 1 Nm
to 1.5 Nm (to fit the seal)
❑ 2nd level: final tighten‐
ing torque: 2.5 Nm
4 - Brake line
❑ to rear right brake cali‐
per
❑ Distinguishing feature: ∅ 5.25 mm and pipe screw with long thread M12 x 1
❑ 14 Nm
5 - Brake line
❑ to front left brake caliper
❑ Distinguishing feature: ∅ 5.25 mm and pipe screw with long thread M10 x 1
❑ 14 Nm
6 - Brake line
❑ to front right brake caliper
❑ Distinguishing feature: ∅ 5.25 mm and pipe screw with long thread M12 x 1
❑ 14 Nm
7 - Brake line
❑ to rear left brake caliper
❑ Distinguishing feature: ∅ 5.25 mm and pipe screw with long thread M10 x 1
❑ 14 Nm
8 - Brake line
❑ from master brake cylinder (push rod piston circuit) to ABS hydraulic unit - N55-
❑ Distinguishing feature: ∅ 6 mm and pipe screw with long thread M12 x 1
❑ 14 Nm
Volkswagen Technical Site: http://vwts.ru http://vwts.info
16
Rep. gr.45 - Anti-lock brake system