Removing And Installing Bulb For Number Plate Light M30 / M32 - Skoda Karoq 2018 Workshop Manual

Karoq 2018 ➤
Electrical system - Edition 10.2017
Caution
Do not touch the glass when installing the light bulb. Your fin‐
gers will leave traces of grease on the glass which then evap‐
orate when the bulb is switched on causing it to cloud.
When installing the cover, pay attention to the correct fitting.
Water ingress destroys the headlight.
Removing
– Remove cover -1-.
– Press catch in direction of arrow -A- and unscrew mount -2-
with the lamp -1- in direction of arrow -B-.
– Remove bulb -1- from holder -2-.
Installing
Installation is carried out in the reverse order.
1.10 Removing and installing bulb for number
plate light -M30- / -M32-
Applies for the Halogen headlight.
WARNING
The H7 light bulb is pressurized and can burst when changing
the bulb.
It is recommended to wear gloves and safety glasses when
changing bulbs.
Caution
Do not touch the glass when installing the light bulb. Your fin‐
gers will leave traces of grease on the glass which then evap‐
orate when the bulb is switched on causing it to cloud.
When installing the cover, pay attention to the correct fitting.
Water ingress destroys the headlight.
78
Rep. gr.94 - Lights, bulbs, switches - exterior
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not permitted
unless authorised by ŠKODA AUTO A. S. ŠKODA AUTO A. S. does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by ŠKODA AUTO A. S.�