Skoda Kodiaq 2017 Workshop Manual page 25

– Position brake pedal load , e.g. -V.A.G 1869/2- .
– Attach the bleeder hose of the bleeding bottle onto the vent
valves of the front left and rear left brake caliper and open vent
valves.
– Press down brake pedal with brake pedal load , e.g. -V.A.G
1869/2- , at least 60 mm.
– Close front left and rear left bleeder valves.
– Do not remove brake pedal load , e. g. -V.A.G 1869/2- .
– Place a sufficient non-fluffing cloths under and around the ABS
control unit - J104- and the ABS hydraulic unit - N55- .
NOTICE
Make sure that no brake fluid gets onto the contacts of the ABS
control unit - J104- .
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
3. Control unit and hydraulic unit
21