Skoda Kodiaq 2017 Workshop Manual page 78

Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
1 - Screw
❑ 20 Nm
2 - Bearing bracket
❑ Removing and installing
⇒ "4.2 Removing and in‐
stalling bearing brack‐
et", page 75
3 - Nut
❑ self-locking
❑ 25 Nm
4 - Retaining clip
❑ Replace after disas‐
sembly
❑ inserted into both bear‐
ing bracket bore holes
5 - Nut
❑ self-locking
❑ 25 Nm
6 - Bearing shaft
❑ Replace after disas‐
sembly
❑ removing:
– Removing bracket
⇒ "4.2 Removing and in‐
stalling bearing brack‐
et", page 75 .
– Turn bearing bolts anti-
clockwise, the bearing
bolt catches will break
off.
– Pull out bearing bolt.
Note
Do not grease the bearing bolt. The
bearing bolt must remain dry.
❑ installation is carried out in reverse order
Note
The screw for the bearing bolt must
click audibly into place when tight‐
ening.
7 - Bushing
Note
Note installation position.
8 - Brake pedal
❑ Assignment ⇒ Electronic Catalogue of Original Parts
74
Rep. gr.46 - Brakes - mechanism