46 –
Brakes - mechanism
1
Front brakes
⇒ "1.1 Assembly overview - front brakes", page 45
⇒ "1.2 Removing and installing brake pads, front brake",
page 47
⇒ "1.3 Removing and installing brake caliper, front brake",
page 51
⇒ "1.4 Removing and installing brake discs, front brake",
page 54
⇒ "1.5 Removing and installing brake shield plates, front brake",
page 55
1.1
Assembly overview - front brakes
Note
Replace bolts / nuts that are tightened at an angle of rotation, as well as replacement components after
♦
removal.
Observe the instructions for changing the pad
♦
⇒ "1.2.1 Changing the brake pads of the front brake - Mounting instructions", page 47
Brake inspection
⇒ "4 Brake inspection", page 7
♦
After replacing the brake pads, depress brake pedal firmly several times when the vehicle is stationary to
♦
ensure the brake pads are properly seated in their normal operating position.
Use the brake filling and bleeding device , e.g. -VAS 5234- , to drain the brake fluid from the brake fluid
♦
reservoir.
Use the brake pedal load , e.g. -V.A.G 1869/2- , before removing a brake calliper or separating a brake hose
♦
from the brake calliper.
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
.
45
1. Front brakes