Skoda Kodiaq 2017 Workshop Manual page 31

Tightening sequence of the brake lines
Tightening torques - summaries of components
Note
Replace bolts / nuts that are tightened at an angle of rotation, as
well as replacement components after removal.
♦ ⇒ "3.1.1 Exploded view – control unit and hydraulic unit, left-
hand drive vehicle", page 15
♦ ⇒ "1.1 Summary of components - front brake caliper",
page 82
♦ ⇒ "2.1 Summary of components - rear brake caliper",
page 85
♦ Noise insulation ⇒ General body repairs, exterior ; Rep. gr.
66 ; Noise insulation; Summary of components- noise insula‐
tion
♦ Pendulum support ⇒ Rep. gr. 10 ; Assembly mountings;
Summary of components - assembly mountings
♦ Pre-exhaust pipe ⇒ Rep. gr. 26 ; Exhaust pipes/silencers .
♦ Remove the propshaft ⇒ Rep. gr. 39 ; Propshaft; Summary
of components - propshaft .
3.2.3 Removing and installing the ABS control
unit - J104- / ABS hydraulic unit - N55- ,
vehicles with left-hand drive and diesel
engine (Bi-Turbo)
Special tools and workshop equipment required
♦ Brake pedal load e.g. -V.A.G 1869/2-
♦ Repair kit -1H0 698 311 A-
♦ Engine support bracket - T10533-
Removing
Fitting location:
Kodiaq 2017 ➤ , Kodiaq 2019 ➤
Brake systems - Edition 11.2018
3. Control unit and hydraulic unit
27