Sample Set (Checking The Finished Output Of The Copy) - Fuji Xerox ApeosPort-II C4300 User Manual

3 Copy
1
Select any item.
Off
The next stack of documents is copied after the previous stack.
Chapter Start
The next stack of documents is copied from Side 1 of a new sheet of paper.
If [Chapter Start] is not selected and copying of the first loaded document ends on Side
1, copying for the next document will begin on Side 2 of the last page of the first
document. When [Chapter Start] is selected and [Multiple-Up] is marked, even if all
documents are divided for every chapter before all of them are assembled in [Multiple-
Up] feature, the next stack of document is copied from Side 2 of a paper.
Separators
Separators can be inserted. Select the paper tray to use for the separators from
[Separators Tray].
3

Sample Set (Checking the Finished Output of the Copy)

When making multiple sets of copies, you can make a proof set to check the finished
output and then print the remaining copies. You can select to continue or cancel the job
after the confirmation. The number of sets to be copied can also be changed. The
sample is included in the total number of sets.
Note
1
Select [Sample Set].
2
Select [On].
Off
No sample set is made.
On
A sample set is made.
[Copy Job] screen
The machine pauses and displays the [Copy Job] screen after a proof set is copied.
Settings Change
The [Settings Change] screen is displayed. Uncheck the settings you want to cancel.
This button is displayed only when the settings that can be cancelled.
100
• This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.