Placing A New Unit; Connecting Stacking Cables; Returning The Unit For Repair - Avaya Virtual Services Platform 7000 Series Troubleshooting Manual

Troubleshooting hardware
For more information about updating software, see Getting Started with Avaya Virtual Services
Platform 7000 Series, NN47202–303.

Placing a new unit

Place the new unit in the stack where the failed unit was connected.
For more information about physically installing a switch, see Installing Avaya Virtual Services
Platform 7000 Series, NN47202–300.

Connecting stacking cables

Reconnect the Fabric Interconnect (FI) cables to correctly stack the replacement unit.
For more information about FI cabling and configurations, see Installing Avaya Virtual Services
Platform 7000 Series, NN47202–300.

Returning the unit for repair

If troubleshooting determines a failure that cannot be resolved on-site, you can return the unit to
Avaya for repair.
Contact Avaya for return instructions and RMA information.
Troubleshooting Avaya VSP 7000 Series
44
Comments on this document? infodev@avaya.com
July 2015