Corrective maintenance
10.2 Downloading the converter settings
Function description
Procedure
1. Attach the Operator Panel to the converter.
2. Start the download.
3. Wait until the transfer is complete.
4. After loading, check whether the converter outputs Alarm A01028.
– Alarm A01028:
– No alarm A01028: Proceed with the next step.
5. Back up the settings so that they are protected against power failure.
6. Select menu "Parameter".
372
The loaded settings are not compatible with the converter.
Delete the alarm with p0971 = 1.
Recommission the drive.
Parameter groups
Search by number
My parameters
Changed parameters
Parameter filter
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL