Siemens SINAMICS G110M Operating Instructions Manual page 290

Advanced commissioning
8.19 Motor control
Function description
The converter has different U/f characteristics.
①
②
Figure 8-51
With increasing speed or output frequency, the converter increases its output voltage U. The
maximum possible output voltage of the converter depends on the line voltage.
The converter can increase the output frequency even at the maximum output voltage. The
motor is then operated with field weakening.
The value of the output voltage at the rated motor frequency p0310 also depends on the
following variables:
• Ratio between the converter size and the motor size
• Line voltage
288
The voltage boost of the characteristic improves speed control at low speeds
With the flux current control (FCC), the converter compensates for the voltage drop in the stator
resistor of the motor
Characteristics of U/f control
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL