Siemens SINAMICS G110M Operating Instructions Manual page 175

Table 8-10
Parameter
p0015 = 12
Parameter
Parameter
p0840[C]
p1113[C]
r0722.0...n
p3334
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
8.5 Controlling clockwise and counter-clockwise rotation via digital inputs
Set two-wire control, ON/reverse in quick commissioning
Description
Macro drive unit
Assigning digital inputs to the commands:
• Digital input 0: ON/OFF1
• Digital input 1: Reversing
Wiring example for the factory settings (Page 80)
Description
BI: ON/OFF (OFF1)
BI: Setpoint inversion
CO/BO: CU digital inputs, status
2/3 wire control selection
0: Two-wire control, ON/reverse
Advanced commissioning
Factory setting
0
0
-
0
173