Siemens SINAMICS G110M Operating Instructions Manual page 355

Parameter
r2132
r2134[0 ... 63]
r2145[0 ... 63]
r2146[0 ... 63]
Table 9-9
Parameter
You can change up to 20 different alarms into a fault or suppress alarms:
p2118[0...19]
p2119[0 ... 19]
Further information is provided in the parameter list.
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
Description
CO: Actual alarm code
Alarm value for float values
Alarm time received in days
Alarm time removed in days
Extended settings for alarms
Description
Change message type, message number
Change message type, type
Alarms, faults and system messages
9.5 Alarms, alarm buffer, and alarm history
Factory setting
-
-
-
-
Factory setting
0
1
353