Siemens SINAMICS G110M Operating Instructions Manual page 29

• Earthing cable for earthing the motor to the terminal housing (except FS80/90).
• PROFIBUS Communications cable for connecting the CPI board to the communications
connection on the Control Module.
SINAMICS G110M HanQ 4/2 variant
• Male and female HanQ connectors, one of which is pre-wired with pins crimped on the other
end ready for assembly.
• Blanking cap for users not wishing to utilize the power-through daisy chain.
Table 3-3
Option
24 V Power supply
Internal braking resistor
(FSA)
Internal braking resistor
(FSB)
Glanded connector kit
HanQ connector kit
Repair Switch
Wall Mount Kit (WMK)
Compatible motors for the SINAMICS G110M system
The SINAMICS G110M is designed for mounting on SIMOGEAR geared motors. It is compatible
with motors from frame size 71 to frame size 112. For an overview of which motors can be
operated with SINAMICS G110M in combination with SIMOGEAR, please read FAQ 1097385577
at the following link:
FAQ 1097385577 (https://support.industry.siemens.com/cs/us/en/view/109738577)
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL
SINAMICS G110M Options
Description
Internal 24 V DC power supply for the CU240M
Continuous braking power 7.5 W, peak power 75 W
(load period t
ance 350 Ω
Continuous braking power 20 W, peak power 200
W (load period t
ance 175 Ω
Comprises the following connectors:
• M20 screw gland - used for 24 V power supply
daisy chain
• M25 plastic gland - used for the 3-phase mains
daisy chain
• M12 plastic gland - used for the EM-brake cable
entry.
Comprises the following connectors:
• Connector cap 7/8th internal thread - used for
the 24 V power blanking cap
• HanQ blanking cap - used for the mains input
blankingcap
• M12 plastic gland - used for the EM-brake cable
entry.
The Repair Switch allows the motor/converter to be
isolated from the mains. This means that all power
to the motor is terminated and the converter can‐
not start or stop the motor.
The WMK allows the converter to be mounted on a
wall or flat surface separate from the location of
the motor.
=12s over a period t=240s) resist‐
a
=12s over a period t=240s) resist‐
a
Description
3.2 SINAMICS G110M converter
Article number
6SL3555-0PV00-0AA0
6SL3501-0BE18-8AA0
6SL3501-0BE22-0AA0
6SL3566-2VA00-0GA0
6SL3566-2LA00-0GA0
6SL3555-0PR01-0AA0
6SL3566-1GA00-0GA0
27