Advanced commissioning
8.18 PID technology controller
Further information
You will find additional information on the following PID controller components on the Internet
at:
• Setpoint input: Analog value or fixed setpoint
• Setpoint channel: Scaling, ramp-function generator and filter
• Actual value channel: Filter, limiting and signal processing
• PID controller: Principle of operation of the D component, inhibiting the I component and the
control sense
• Enable, limiting the controller output and fault response
286
FAQ (http://support.automation.siemens.com/WW/view/en/92556266)
Distributed converter for SIMOGEAR geared motors
Operating Instructions, 10/2020, FW V4.7 SP13, A5E31298649B AL