Clearing The Internal Memory; About Linkware And Linkware Stats Software - Fluke OF-500 OptiFiber User Manual

Memory card folders can store a maximum of 500
records each.
Loss/length tests in Smart Remote mode take up
⎯
two records one for each fiber.
OptiFiber software version 2.0 supports cards up to
4 gigabytes. Later versions may support larger cards. Check
the Fluke Networks Knowledge Base for the latest
information.
To see the memory space available, press
A
Memory Status. Press to switch between the memory
card and internal memory status.

Clearing the Internal Memory

To clear the internal memory, which moves records to the
memory card, do the following:
1 On the System tab in Setup, set the CURRENT FOLDER
to the desired location on the memory card.
F
2 Press ; then select Empty Internal Memory.
Notes
F
; then select

About LinkWare and LinkWare Stats Software

About LinkWare and LinkWare Stats
Software
LinkWare ™ Cable Test Management software lets you
upload OptiFiber test records to PC, view test results, add
ANSI/TIA/EIA-606-A administration information to records,
and organize, customize, and print test reports.
Details about using LinkWare software are provided in the
LinkWare Getting Started Guide and the online help
available under Help on the LinkWare menu.
The LinkWare Stats Statistical Report option for LinkWare
software provides statistical analysis of cable test reports and
generates browsable, graphical reports. LinkWare software
includes a demo version of LinkWare Stats. Contact Fluke
Networks or visit the Fluke Networks website for more
information on LinkWare Stats.
91