Siemens SINUMERIK 840D Diagnostics Manual page 502

1 Alarms
104025
Definitions:
Remedy:
Program Continuation:
104026
Definitions:
Remedy:
Program Continuation:
104027
Definitions:
Remedy:
Program Continuation:
104029
Definitions:
Remedy:
Program Continuation:
104030
Definitions:
Remedy:
Program Continuation:
105000
Definitions:
Remedy:
Program Continuation:
105001
Definitions:
Remedy:
Program Continuation:
105002
Definitions:
Remedy:
Program Continuation:
105003
Definitions:
Remedy:
Program Continuation:
1-502
No magazine configured
No magazine was configured.
Configure a magazine via the machine data.
Internal
Caution: Tool is being loaded!
Note regarding loading process.
Wait until the loading procedure is terminated.
Internal
Attention: Tool is being unloaded!
Note regarding unloading process.
Wait until the unloading procedure is terminated.
Internal
Loading to this location not possible
The location may already be occupied.
Select another loading location.
Internal
No more data available
All existing data was already displayed.
--
Internal
Error x y
System-internal error.
A memory-access has failed - should not occur in normal operation.
--
Internal
Cycle description sc.com not available
The cycle description sc.com was not found in the NCK file system.
--
Internal
File xxx already exists
The file name entered is already in this directory.
--
Internal
Workpiece xxx already exists
The workpiece name entered is already in this directory.
--
Internal
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
10.04