Siemens SINUMERIK 840D Diagnostics Manual page 497

10.04
101209
Definitions:
Remedy:
Program Continuation:
101210
Definitions:
Remedy:
Program Continuation:
101211
Definitions:
Remedy:
Program Continuation:
101212
Definitions:
Remedy:
Program Continuation:
101213
Definitions:
Remedy:
Program Continuation:
101214
Definitions:
Remedy:
Program Continuation:
101300
Definitions:
Remedy:
Program Continuation:
 Siemens AG, 2004. All rights reserved
SINUMERIK 840D/840Di/810D Diagnostics Guide (DA), 10.04 Edition
SI data confirmed: Drive 1
In the start-up area the function "Confirm Safety Integrated Data" has been started.
The message was output during this function in order to provided the user with an
acknowledgement regarding the operation of the function.
--
Internal
The machine data is being prepared for display
A list image in the machine data was selected for which display options are active.
This image's machine data is individually checked to see whether it is permitted to be dis-
played.
--
Internal
NCK address not changed!
An attempt was made to change the bus address of the NCK in the start-up area.
The change was rejected by the NCK; the reason is unknown.
--
Internal
NCK address changed!
The NCK's bus address was set to the specified value.
--
Internal
Invalid NCK address.
The value specified for the new NCK bus address is too large.
--
Internal
Initialization of this window failed!
An attempt was made to select the image of the NCK address in the start-up area.
An error occurred while determining the nodes on the bus.
Due to inconsistent data, this image cannot be displayed.
--
Internal
Please wait - language is being changed
In the start-up area the softkey "Change language" was pressed.
The screen content is being restructured.
--
Internal
1 Alarms
1-497