Approved Replacement Parts; Preparing For Maintenance Activities; Reference Documents - Avaya CallPilot 201i Maintenance And Diagnostics

the 201i server (in the event of a complete
system failure)
the hard drive
the software feature key (dongle)
MPC-8 cards

Approved replacement parts

Before replacing any parts on your server, refer to the Avaya* product catalog for the part
codes.
Caution:
Risk of system damage
The use of parts that are not approved by Avaya can cause serious system problems or void
your Avaya warranty.

Preparing for maintenance activities

Before you proceed with hardware maintenance activities, review the CallPilot Installation and
Configuration Task List (NN44200-306) for the following information:
• required tools and equipment
• recommended safety precautions for electrostatic discharge, handling cards, and
handling your server
• instructions for shutting down your 201i server or for taking it out of service

Reference documents

Table 1: Call Pilot Customer Documentation Map
Fundamentals
Avaya CallPilot® 201i Server Maintenance and Diagnostics
To replace or install See
Replacing the server on page 93
Replacing the IDE hard drive
Replacing the software feature key
page 108
Replacing Multimedia Processing Cards
page 110
Approved replacement parts
on page 97
on
on
December 2010 15