Troubleshooting your Avaya CallPilot® system
HEX display output
DOWN
Section B: Startup diagnostics
In this section
Startup diagnostic codes
Startup sequence description
Troubleshooting startup problems
Startup diagnostic codes
Introduction
HEX display diagnostic codes are divided into the following two categories:
• critical startup diagnostics
• non-critical operating system and switch diagnostics
28
Avaya CallPilot® 201i Server Maintenance and Diagnostics
Startup codes
The operating system has been shut down. When the
power status LED is on, it is safe to remove the 201i
server from the switch.
If you perform a cold restart by pressing Reset on the
201i server faceplate, or by removing and then
reinserting the 201i server in the switch, the start
sequence starts at stage 1, described on 1.
If you perform a warm restart by selecting Restart on
the operating system shutdown menu, the start
sequence begins at stage 9, described on 9. However,
the HEX display behaves as follows:
• The DOWN message remains displayed until the
operating system start sequence begins.
• The DOWN message does not scroll.
on page 28
on page 31
on page 33
Description
December 2010