Avaya CallPilot 201i Maintenance And Diagnostics page 103

13. Fasten the two screws on the hard drive stiffener cage (along the backplane edge
14. Connect the data cable from the drive to the motherboard connector
15. Connect the drive power connector to the motherboard power connector.
To replace a 3.5 inch drive with a 2.5 inch hard drive
1. Inspect the NTRH0107E5 replacement kit for the following parts:
Avaya CallPilot® 201i Server Maintenance and Diagnostics
of the server).
Caution:
Risk of equipment damage
Ensure the pins on the data connector on the motherboard line up correctly with
the data cable connector.
Item No. Quantity
1 1
2 1
3 4
4 1
5 1
6 1
Description
Power coupler, large to small
2.5 inch disk drive. This item is ordered separately.
Check the Avaya price book for ordering procedures.
Screws (for mounting the hard drive on the bracket)
Small drive bracket
Tie wrap
2.5 inch hard drive adaptor
Hard drive assembly diagram
December 2010 103