Mpc Slot Led Indications; Interpreting The Network And Drive Activity Leds; Introduction - Avaya CallPilot 201i Maintenance And Diagnostics

Troubleshooting your Avaya CallPilot® system

MPC slot LED indications

IF the MPC slot LED
is off
is on
was off, then came on
was on, then went off

Interpreting the network and drive activity LEDs

Introduction

The 201i server provides four LEDs to indicate ELAN Subnet, Avaya server subnet, SCSI
device, and IDE hard drive activity. They are labeled as follows:
LED label
E
C
I
S
24 Avaya CallPilot® 201i Server Maintenance and Diagnostics
the MPC is not receiving power.
It is safe to remove the MPC from the server.
the MPC is in use.
It is not safe to remove the MPC from the server.
the MPC was recognized by the 201i software and
subsequently powered up.
the MPC was successfully disabled using the
Maintenance page in CallPilot Manager.
It is safe to remove the MPC from the server.
ELAN subnet
Avaya server subnet
IDE hard drive
SCSI device (CD-ROM or tape drive)
THEN
Description
December 2010