Avaya CallPilot 201i Maintenance And Diagnostics page 63

DS30X link
To start or stop a component
1. Run CallPilot Manager and log in.
2. In CallPilot Manager, click Maintenance → Maintenance Admin.
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus sign (+) until the component with which you want to work is
5. Click the hardware component that you want to start or stop.
6. Scroll down to the Maintenance section.
7. Click Courtesy Stop, Stop, or Start, as required.
Avaya CallPilot® 201i Server Maintenance and Diagnostics
Component
Result: The Maintenance page appears.
visible.
Result: The Maintenance page refreshes to show details about the component.
The following illustration shows the Maintenance section for an MPC-8 card.
Button
Start If the selected component is out of service, click this button to
put it into service.
Courtesy Stop Click this button to take the selected component out of service.
CallPilot waits for the call to be completed before disabling the
component.
Important:
If you are courtesy stopping all components (that is, you are
taking the entire system down), ensure that you inform all
administrators, desktop messaging users, and Web
messaging users so that they can log off their sessions before
you proceed.
The system asks you to confirm the Courtesy stop. If you click
OK, the component is put out of service after all calls are
finished.
Stop Click this button to take the selected component out of service
immediately. All calls that are in progress are disconnected
immediately.
Components that can be started and stopped
Effect of stopping
Takes the selected DS30X link out of service.
Description
December 2010 63