Performing hardware maintenance and mechanical assembly
2. Insert the card into the slot, and gently push it until it is firmly in place and the ejector
3. Ensure that the MPC's LED lights up green.
4. Run the Configuration Wizard to detect and initialize the new hardware.
5. Start the MPC-8 card and its channels.
114
Avaya CallPilot® 201i Server Maintenance and Diagnostics
facing up if the 201i server is lying horizontally on a flat surface
button pops back out.
For instructions on running the Configuration Wizard, refer to the CallPilot <switch
model> and CallPilot Server Configuration guide for your switch and server.
Note:
You do not need to change any data in the Configuration Wizard. However, you
must apply the configuration changes as instructed on the last screen of the
Configuration Wizard.
Result: For instructions, see
Starting and stopping components
on page 61.
December 2010