Maintenance Activities For Each Component - Avaya CallPilot 201i Maintenance And Diagnostics

Using CallPilot Manager to monitor hardware
Section
Maintenance
Diagnostics

Maintenance activities for each component

The following table identifies the maintenance activities you can perform for each component
that is listed in the component tree.
Component
Motherboard
Media Bus
MPB board
Time Switch
MPCs (embedded on
MPB boards or on
MPC-8 cards)
(embedded on the IPE
58 Avaya CallPilot® 201i Server Maintenance and Diagnostics
Note:
This section does not appear for all components.
This section shows the state of the selected component. Use
this section to start and stop a component before running a
diagnostic test.
This section appears only for components on which you are
allowed to perform maintenance administration.
For more information about working with component states, see
the following sections:
• Viewing component states
• Starting and stopping components
Use the Diagnostics section to run one or more diagnostic tests,
or to view the results of the last diagnostic tests that were run
on the selected component.
This section appears only for components on which you are
allowed to run diagnostics.
For more information about running diagnostics, see the
following sections:
• Running integrated diagnostics
• Viewing the last diagnostic results
Start, stop? Courtesy
stop?
Yes No
Yes No
Yes No
No No
Yes No
Description
on page 59
on page 61
on page 64
on page 67
Diagnostic Replaceable?
s
available?
Yes Yes (IPE server)
Yes No
Yes Yes
No No
Yes embedded: No
MPC-8 cards: Yes
December 2010