Avaya CallPilot 201i Maintenance And Diagnostics page 66

Using CallPilot Manager to monitor hardware
3. Click the plus sign (+) beside the CallPilot server to expand the component tree.
4. Continue clicking the plus sign (+) until the component with which you want to work is
5. Click the hardware component for which you want to run diagnostics.
6. Scroll down to the Maintenance section, and ensure that the component is out of
7. Scroll down to the Diagnostics section.
8. Check the check box for each diagnostic that you want to run.
66 Avaya CallPilot® 201i Server Maintenance and Diagnostics
Result: The Maintenance page appears.
visible.
Result: The Maintenance page refreshes to show details about the component.
service.
Note:
For instructions on taking the component out of service, see
component on page 63.
Result: The following illustration shows the Diagnostics section for an MPC-8 card
(removable MPC.:
To start or stop a
December 2010