Working With The Channel Monitor; Introduction - Avaya CallPilot 201i Maintenance And Diagnostics

4. Click Courtesy Stop, Stop, or Start as required.

Working with the Channel Monitor

Introduction

The Channel Monitor shows the status of call channels. The call channels are the connections
between the server and the switch that carry the call signals to CallPilot.
To view or work with call channel states
1. Run CallPilot Manager and log in.
2. In CallPilot Manager, click Maintenance → Channel Monitor.
Avaya CallPilot® 201i Server Maintenance and Diagnostics
IF you want to stop or start
only one or several channels that are
associated with a DSP
Result: If you clicked Courtesy Stop or Stop, you are asked to confirm the Courtesy
Stop or Stop. Click OK.
The selected channels change to off-duty or on-duty status, according to the action
you chose.
Note:
If the buttons are not available, wait a few seconds for the page to refresh.
Result: The Channel Monitor page appears, showing the DS30X (also known as
DS0) channels associated with each DS30X link.
Working with the Channel Monitor
THEN
check the check box for each channel
that you want to stop or start.
December 2010 71