Cable Specifications And Pinouts; Connector Pinouts For The Srx5400 Services Gateway Routing Engine; Ethernet Port; Table 44: Rj-45 Connector Pinout For The Routing Engine Ethernet Port - Juniper SRX5400 Hardware Manual

CHAPTER 13

Cable Specifications and Pinouts

RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Ethernet
Port
Copyright © 2017, Juniper Networks, Inc.
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Ethernet
Port on page 121
RJ-45 Connector Pinouts for the SRX5400 Services Gateway Routing Engine Auxiliary
and Console Ports on page 122
Console Port Cable and Wire Specifications for the SRX5400 Services
Gateway on page 123
Alarm Relay Contact Wire Specifications for the SRX5400 Services Gateway on page 123
Routing Engine Interface Cable and Wire Specifications for the SRX5400 Services
Gateway on page 124
Signal Loss in Multimode and Single-Mode Fiber-Optic Cable for the SRX5400 Services
Gateway on page 124
Attenuation and Dispersion in Fiber-Optic Cable for the SRX5400 Services
Gateway on page 125
Calculating Power Budget for Fiber-Optic Cable for the SRX5400 Services
Gateway on page 126
Calculating Power Margin for Fiber-Optic Cable for the SRX5400 Services
Gateway on page 126
The port on the Routing Engine labeled
Ethernet RJ-45 receptacle that accepts an Ethernet cable for connecting the Routing
Engine to a management LAN (or other device that supports out-of-band management).
Table 44 on page 121 describes the RJ-45 connector pinout.

Table 44: RJ-45 Connector Pinout for the Routing Engine ETHERNET Port

Pin Signal
1 TX+
2 TX-
3 RX+
is an autosensing 10/100-Mbps
ETHERNET
121