Maintaining Mx10003 Interface Modules - Juniper MX10003 Hardware Manual

Idle
Model
Start time
Uptime
Last reboot reason
Load averages:
Figure 47: Installing an MX10003 RCB
SEE ALSO
MX10003 Routing and Control Board (RCB) Description | 47
MX10003 RCB LEDs | 51

Maintaining MX10003 Interface Modules

IN THIS SECTION
Maintaining MICs | 141
Replacing an MX10003 MIC | 141
Maintaining MPCs | 146
Replacing an MX10003 MPC | 148
Maintaining Cables That Connect to MPCs or MICs | 152
Replacing a Cable on an MX10003 MPC or MIC | 154
100 percent
RE-S-2X00x6
2017-11-04 02:37:23 PDT
2 days, 22 hours, 25 minutes, 41 seconds
0x1:power cycle/failure
1 minute 5 minute
0.16 0.14
15 minute
0.09
140