Note Ip Settings - Avaya S8700 Series Manual

Note IP settings

Note the IP settings assigned to the processor as they may be used for the Avaya S8700 or
S8710 Media Server. Verify against the filled-out Electronic Preinstallation Worksheet.
The following administration is done on the Services laptop connected to the processor circuit
pack using telnet.
1. Select Start > Run to open the Run dialog box.
2. Type telnet 192.11.13.6 and press Enter to access the Avaya IP600.
3. Log in as lucent3 to get to the LAC prompt.
4. Type bash and press Enter to start a BASH session.
5. Type setip and press Enter to display the current list of IP settings. You will see the
following information:
cust: IPaddress, subnet mask, gateway
dns: server name, domain name, 2 DNS server IP addresses
wins: 2 WINS server IP addresses
ras: 1 remote access server IP address
6. Write down this information, exactly as it appears.
You must record this information exactly as it appears here. You cannot miss any periods,
commas, or other punctuation marks. Record information in lower or upper case as it appears.
90 Migrating to the Avaya S8700 Media Server