®
xStack
DGS-3200 Series Layer 2 Managed Gigabit Ethernet Switch Web UI Reference Guide
DHCP Server Dynamic Binding
This window is used to delete the DHCP server dynamic binding table.
To view the following window, click Network Application > DHCP Server > DHCP Server Dynamic Binding:
Figure 8 - 11. DHCP Server Dynamic Binding window
The following parameters may be configured:
Parameter
Description
Enter the DHCP Server Pool name.
Pool Name
Click the Clear button to clear all the information entered in the fields. Click the Clear All button to remove all the entries listed
in the table.
DHCP Conflict IP
The DHCP server will use PING packet to determine whether an IP address is conflict with other host before binding this IP. The
IP address which has been identified conflict will be moved to the conflict IP database. The system will not attempt to bind the IP
address in the conflict IP database unless the user clears it from the conflict IP database.
To view the following window, click Network Application > DHCP Server > DHCP conflict IP:
Figure 8 - 12. DHCP Conflict IP window
Click the Clear All button to remove all the entries listed in the table.
DHCP Local Relay Settings
The DHCP local relay settings allows the user to add option 82 into DHCP request packets when the DHCP client gets an IP
address from the same VLAN. If the DHCP local relay settings are not configured, the Switch will flood the packets to the VLAN.
In order to add option 82 into the DHCP request packets, the DHCP local relay settings and the state of the Global VLAN need to
be enabled.
To view the following window, click Network Application > DHCP Local Relay Settings:
238