Dhcp Client Commands - D-Link 5000 Series Cli Reference Manual

5000 Series Layer 2/3 Managed Data Center Switch CLI Reference Guide
DHCP L2 Relay is
DHCP L2 Relay is enabled on the following VLANs:
2
5-429 clear dhcp l2relay statistics interface
Reset the DHCP L2 relay counters to zero. Specify a single or all port counters to clear.
clear dhcp l2relay statistics interface {slot/port | all}
Parameters
slot/port
all
Default
The default is None.
Command Mode
Privileged EXEC

DHCP Client Commands

5-430 dhcp client vendor-id-option
Enable the inclusion of DHCP Option-60 and Vendor Class Identifier in the DHCP server transmitted
requests.
No command disables the inclusion of DHCP Option-60 and Vendor Class Identifier in DHCP server.
dhcp client vendor-id-option string
no dhcp client vendor-id-option
Parameters
string
Default
The default is None.
Enabled.
Enter an interface in slot/port format.
Clears DHCP L2 Relay statistics for all enabled interfaces.
Vendor-id suboption string of length <0 - 128> characters.
466