9
UTILITY OPERATION
9.1.6 Parameter setting file
This section explains the parameter setting files of the C Controller setting utility, CC-Link
utility, and MELSECNET/H utility.
(1) Loading/saving the parameter setting file
9
- 8
9.1 Common Utility Operations
9.1.6 Parameter setting file
The following indicates a parameter setting file loading/saving procedure.
1) Click the
Load File
Click the
Save File
Figure 9.11 Loading/saving the parameter setting file
2) Read/save the settings.
Item
Look in
(Save in)
File name
button
Open
(
button)
Save
button
Cancel
button to load the parameter setting file.
button to save the parameter setting file.
Click.
Figure 9.12 Open screen
Table9.4 Explanation of Save As screen
Select the location from (or to) which the parameter setting file will
be loaded (or saved).
Enter the file name to be read (or saved).
Loads (or saves) the file of the entered file name.
Ends without loading (saving).
Description