Mitsubishi MELSEC-Q Series User Manual page 361

9
UTILITY OPERATION
Item
button
OK
Self station information
F. Loop status of each station
R. Loop status of each station
(f) Loop status of each station screen
Displays the forward and reverse loop statuses in the case of the optical loop
system.
The number of displayed stations is equal to the "Total stations" set on the
"Parameter setting" screen.
Figure 9.85 Loop status of each station screen
Table9.72 Explanation of Loop status of each station screen
Closes the "Loop status of each station" screen.
Displays the self station information of the MELSECNET/H
module.
( This section (1))
Displays the forward loop status in the optical loop system as
shown below.
Light blue : Normal, reserved station, or unconnected station
Red : Error station
Displays the reverse loop status in the optical loop system as
shown below.
Light blue : Normal, reserved station, or unconnected station
Red : Error station
Description
9.4 MELSECNET/H Utility
9.4.4 Operating Other station monitor screen
Correspon- Correspon-
ding SB ding SW
SW0040,
SB0044,
SW0041,
SB0057,
SW0042,
SB005A
SW0046
SW0091
to
SW0094
SW0095
to
SW0098
9
- 111
9
10
11
12
13
14
15
16