Mitsubishi MELSEC-Q Series User Manual page 329

9
UTILITY OPERATION
Other station monitor
Module information
Item
Target module
*1
Logical Sta. No.
Sta. No.
Target CPU
button
Set
Target setting list
button
Change
button
Delete
Table9.52 Explanation of Target setting screen
Online operation Parameter setting
Select the module to be set.
(Initial value: "1 slot", Setting range: "1 slot" to "8 slot")
Specify the logical station No. of the module selected in "Target module".
(Initial value: 65, Setting range: 65 to 239)
Set the station No. of the CC-Link module controlled by the multiple CPU system.
(Initial value: 0, Setting range: 0 to 63)
Set the CPU (CPU No. used in the multiple CPU system) to be accessed.
(Initial value: 1, Setting range: 1 to 4)
Registers the set or modified data (Logical Sta. No., Sta. No., Target CPU) to the target
setting list.
Displays a list of the Logical Sta. Nos. set to the module selected in "Target module" and
the corresponding station Nos. and target CPUs.
Displays the data in the row (Logical Sta. No.) selected in the Target setting list in the
Logical Sta. No. area.
(Double-clicking the desired row can also chage the Logical Sta. No. area setting.)
Deletes the line (Logical Sta. No.) selected in the Target setting list.
* 1 The logical station No. is a logical number specified as the "station No." in the Device monitor
utility or user program (MELSEC data link function).
Target setting
Description
9.3 CC-Link utility
9.3.6 Operating Target setting screen
9
Test
10
11
12
13
14
15
16
9
- 79