Mitsubishi MELSEC-Q Series User Manual page 358

9
UTILITY OPERATION
Item
button
OK
Self station information
Communication status of each
station parameter
Error status of each station
parameter
9
- 108 9.4 MELSECNET/H Utility
9.4.4 Operating Other station monitor screen
(c) Parameter status of each station screen
Displays the parameter communication status and error status of each station.
The number of displayed stations is equal to the "Total stations" set on the
"Parameter setting" screen.
Figure 9.82 Parameter status of each station screen
Table9.69 Explanation of Parameter status of each station screen
Closes the "Parameter status of each station" screen.
Displays the self station information of the MELSECNET/H
module.
( This section (1))
Displays the parameter communication status of each station
as shown below.
Light blue: Status other than "communicating with
parameters", reserved station, or unconnected
station
Red : Communicating with parameters
Displays the parameter error status of each station as shown
below.
Light blue: Parameters normal, reserved station, or
unconnected station
Red : Parameter error
Description
Correspon- Correspon-
ding SB ding SW
SW0040,
SB0044,
SW0041,
SB0057,
SW0042,
SB005A
SW0046
SW0078
to
SW007B
SW007C
to
SW007F