Mitsubishi MELSEC-Q Series User Manual page 521

14
COMMUNICATIONS BETWEEN CPU MODULES
(3) Functions
QBF_WaitEvent
QBF_GINT
Remark
The following indicates the functions used for event notification.
Table14.3 Functions used for event notification
Function name
Waits for an interrupt event notification from the user program
(QBF_GINT function) of the C Controller module or from the
sequence program (S(P).GINT instruction) of the programmable
controller CPU.
Issues an interrupt event to the C Controller module.
(Equivalent to the S(P).GINT instruction of the programmable
controllerCPU)
* 1 The QBF_GINT function can also issue an interrupt to the Motion CPU.
( Section 14.6)
1.Refer to Chapter 10 for details of the bus interface functions.
2.Refer to this section (4) for the S.GINT instruction of the programmable
controller CPU.
Function
*1
14.2 Event Notification
9
10
11
12
13
14
15
16
14
- 4