Operating Module Information Screen - Mitsubishi MELSEC-Q Series User Manual

9
UTILITY OPERATION

9.4.2 Operating Module information screen

The Module information screen displays various types of information of the MELSECNET/
H module (self station) that is controlled by the connected C Controller module.
POINT
(1) Module information screen
Module information
Item
Link device refresh time
Max.
Min.
Current
1. If a communication error has occurred during connection, click the
button or make the connection target setting again.
Start monitor
2. Communications are not available during reset of the C Controller module.
Start communications after terminating the reset process.
Figure 9.74 Module information screen
Table9.57 Explanation of Module information screen
Error history monitor Other station monitor
Displays the total link device refresh time taken to refresh data
with the MELSECNET/H module controlled by the C Controller
module (host CPU). (Unit: ms)
Displays the maximum total link device refresh time in the
past.
The symbol, "-" appears when Link device refresh cycle (
Section 9.4.6) is 0ms.
Displays the minimum total link device refresh time in the past.
The symbol, "-" appears when Link device refresh cycle (
Section 9.4.6) is 0ms.
Displays the current total link device refresh time.
The symbol, "-" appears when Link device refresh cycle (
Section 9.4.6) is 0ms.
Online operation
Description
9.4 MELSECNET/H Utility
9.4.2 Operating Module information screen
Parameter setting Target setting
Correspon- Correspon-
ding SB ding SW
(To next page)
9
9
10
11
12
13
14
15
16
- 89