Mitsubishi MELSEC-Q Series User Manual page 613

18
TROUBLESHOOTING
(2) Corrective actions for "MXwdkDrv" events by event Nos.
Event No.
0x40000000 The clock data of the C Controller module was set.
0xC0000001 An exception error occurred.
(3) Corrective actions for "MUtllfQbf" events by event Nos.
Event No.
0xC0000000 A packet illegal error occurred.
0xC0000001 An instruction error occurred.
0xC0000002 A socket generation error occurred.
0xC0000003 A port acquisition error occurred.
0xC0000004 A bind error occurred.
Corrective actions for events that may occur in "MXwdkDrv" are listed below by event
Nos.
Table18.13 Corrective actions for "MXwdkDrv" events by event Nos.
Event
Corrective actions for events that may occur in "MUtllfQbf" are listed below by event
Nos.
Table18.14 Corrective actions for "MUtllfQbf" events by event Nos.
Event
Reexamine the user program by checking the
event detail information (such as error details,
task names and program counters). Check
Tornado operation method as well.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
Check the port No. used and change it if
necessary.
Change the IP address.
Check the utility and C Controller module
versions.
Restart the C Controller module.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
Check the port No. used.
Check for overlap between the C Controller
module ports.
Restart the C Controller module.
Please consult your local Mitsubishi service
center or representative, explaining the details
of the problem.
18.4 Error Code and Error Message Lists
18.4.2 Actions by Event No.
Corrective action
Corrective action
18
- 53
17
18