Mitsubishi MELSEC-Q Series User Manual page 52

2
SYSTEM CONFIGURATION
(2) When the slim type main base unit (Q3 SB) is used
Table2.2 Restrictions on the system configuration, and applicable base units and power supply modules
Maximum number of
mounted I/O modules
Available slim type main
base unit model
Slim type power supply
module
2
- 8 2.1 System Configuration
2.1.4 Overview of system configuration
...
Slim type main base unit
Q35SB (5 slots occupied)
CPU 0
Slim type
power supply
C Controller module
module
Figure 2.6 System configuration example when slim type main base unit is used
Precautions
• The slim type main base unit does not have an extension cable connector.
Connection of extension base units or GOT (bus connection) is not available.
When 32-point modules are loaded to slots.
....
1 2 3 4
Slot number
....
I/O number
5 modules
Q32SB, Q33SB, Q35SB
Q61SP