Installation - Mitsubishi MELSEC-Q Series User Manual

8
INSTALLING AND UNINSTALLING SW[]PVC-CCPU

8.2 Installation

This section explains the installation of SW PVC-CCPU.
(1) Installation procedures
(2) Installation
8
- 2 8.2 Installation
Start
Install Tornado into the development
environment (personal computer).
Install SW PVC-CCPU into the
development environment (personal
computer).
Completed
Figure 8.1 Installation flowchart
The following explains the installation of SW PVC-CCPU.
Install SW PVC-CCPU into the development environment (personal computer).
The screens used in this section are those of Microsoft
Operating System.
When installing SW PVC-CCPU into either of the following OS, refer to
• Microsoft Windows NT
R
• Microsoft Windows
R
POINT
1. When installing SW PVC-CCPU into the development environment
(personal computer), log on as a user with Administrator attribute.
2. Remove all programs included in Startup and restart Windows
installation.
3. Install SW PVC-CCPU by "Add or Remove Programs" in "Control Panel".
Alternatively, execute "Setup.exe".
Double-click "Setup.exe" in the CD-ROM, and start installation from Step 6).
4. SW PVC-CCPU can be overwritten only when the same version has been
installed.
When installing another version, uninstall the old one before the installation.
Tornado's Manual
This section (2)
Workstation Operating System Version 4.0
R
2000 Professional Operating System
R
Windows XP Professional
R R
REMARKS
before the
R
.