Mitsubishi MELSEC-Q Series User Manual page 558

17
STARTING MULTIPLE CPU SYSTEM
17
- 11 17.2 Setting Parameters Added for Multiple CPU System
17.2.4 Reusing preset multiple CPU parameters
(From previous page)
(To next page)
POINT
When the multiple CPU parameters is imported and if "Online module change" is
enabled with a check mark in the source parameters, "Online module change" on
the <<Multiple CPU setting>> tab will be also check-marked on the C Controller
setting utility.
Since the C Controller module does not support online module change, take either
of the following actions if this happens.
1. On GX Developer, uncheck "Online module change" in the source
parameters, and import the multiple CPU parameters again.
2. Click the
Default
assignment setting>> tab of the C Controller setting utility to return the
settings to the initial values, and set the same multiple CPU parameters with
the import source parameters again.
Verify the multiple CPU setting data on the
<<Multiple CPU setting>> tab.
Check the I/O assignment setting and base setting
data on the <<I/O assignment setting>> tab.
Click the Detail setting button to display the "Detail
setting" screen.
button on the <<Multiple CPU setting>> or <<I/O