Details Of I/O Assignment By C Controller Setting Utility - Mitsubishi MELSEC-Q Series User Manual

6
I/O NUMBER ASSIGNMENT

6.6.2 Details of I/O assignment by C Controller setting utility

In I/O assignment, the "Type (module type)", "Points (I/O points)" and "Start XY" (starting I/
O number) can be set for each slot of the base units.
For example, to change the number of occupied I/O points of a designated slot, only the
number of occupied I/O points can be designated.
For the items containing no setting, mounting status on the base unit is applied.
(1) I/O assignment
6
- 19 6.6 I/O Assignment by C Controller Setting Utility
6.6.2 Details of I/O assignment by C Controller setting utility
Make I/O assignment on the <<I/O assignment setting>> tab of the C Controller
setting utility.
(a) (b)
Figure 6.16 I/O assignment setting
(a) Slot
The slot No. and what number of the slot on what number of the stage are
displayed for each slot.
When the base unit is set in Auto mode, "*" indicates the base unit stage number
and the slot number counted from Slot 0 of the main base unit is displayed.
(c) (d) (e)