Mitsubishi MELSEC-Q Series User Manual page 279

9
UTILITY OPERATION
Module information Event history
Item
Type
button
Start monitor
button
Stop monitor
button
Information
*2
Input
*2
1) X area
*2
Output
*2
2) Y area
Table9.13 Explanation of Module monitor screen (Continued)
Module monitor
SRAM monitor
Displays the number of I/O points and type of the module if the slot where
any other than CPU modules is installed is specified in "Slot No."
The value within parentheses is the "points" value in the parameter setting
(I/O assignment setting).
Displays CPU No. and "own station" when the slot where a CPU module
(host) is installed is specified in "Slot No."
Displays CPU No. when the slot where a CPU module (another) is
installed is specified in "Slot No."
Displays "CPU (Empty)" when the slot to which "CPU (Empty)" is set in I/
O assignment is specified in "Slot No."
Starts monitoring.
During monitoring, this button changes to
top right of the button.
In an offline status, this button cannot be clicked.
Stops monitoring.
When monitoring is stopped, this button changes to
Displays the system information screen.
During monitoring, this button cannot be clicked.
Displays the input (X) status of the slot specified by the slot No. in word
units.
Displays the input (X) status of the slot specified by the slot No. in bit
units.
Display
0
1
Displays the output (Y) status of the slot specified by the slot No. in word
units.
Double-clicking this displays the "Data Change" screen.
Entering a value into the "Data Change" screen performs forced output.
Displays the output (Y) status of the slot specified by the slot No. in bit
units. Double-clicking this performs forced output.
Display
0
1
* 2 The input and output data display covers the number of points assigned in the parameter setting
(I/O assignment setting) of the module installed to the specified slot No.
* 3 The input format of the numerical value for forced output or forced write is the same as selected in
"Format".
Online operation
Description
, and "*" flashes at
Stop monitor
Start monitor
Description
OFF
ON
Description
OFF
ON
9.2 C Controller Setting Utility
9.2.5 Operating Module monitor screen
Reference
section
10
11
12
.
This section
(3)
13
14
*3
15
(To next page)
16
9
- 29
9