Mitsubishi MELSEC-Q Series User Manual page 591

18
TROUBLESHOOTING
error code
2200 No parameter file has been set.
2502 One command (one line) in the script file has 129 or more characters.
* 2 In the "Error time operation mode" on the <<System setting>> tab of the C Controller setting utility, the CPU operation status after error
occurrence can be set to "Stop" or "Continue". (The LED display also changes according to the setting.)
Error description and cause Corrective action
Set the parameter file.
On the C Controller setting utility, check the event information of the
event No. 0x0000111 that occurred at "MMain", correct/delete the
description of the relevant script file, and restart the C Controller
module.
18.3 Actions for Lit/Flashing ERR. LED
17
18
18
- 31