Mitsubishi MELSEC-Q Series User Manual page 343
C controller module
Hide thumbs
Also See for MELSEC-Q Series:
- Programming manual (1296 pages) ,
- User manual (814 pages) ,
- Reference manual (532 pages)
Table of Contents
Advertisement
9
UTILITY OPERATION
Table9.59 Explanation of Module detail information screen (Continued)
Item
Self station information
Start I/O No.
Network No.
Group No.
Sta. No.
Network
Type
Self station status
Parameter setting
Reserved station setting
Transmission mode
Duplex transmission
setting
Duplex transmission
status
Transmission speed
Description
Displays the self station information of the MELSECNET/H
module.
Displays the start I/O No. of the self station.
(Display range: 0000 to 0FE0)
Displays the network No. of the self station.
(Display range: 1 to 239, "-")
Displays the group No. of the self station.
(Display range: 0 to 32, "-")
Displays the station No. of the self station.
(Display range: 1 to 64, "-")
Displays the network to which the MELSECNET/H module is
connected.
(Display item: "MELSECNET/H Extended (Loop)",
"MELSECNET/H Extended (Bus)", "MELSECNET/H (Loop)",
"MELSECNET/H (Bus)", "MELSECNET/10 (Loop)",
"MELSECNET/10 (Bus)")
Displays the type of the self station.
(Display item: "Net control station, PLC-PLC", "Normal net
station, PLC-PLC")
Displays the operational setting of the self station.
Displays the parameter setting status of the self station.
(Display item: "Common parameter", "Common + Spcfc",
"Default parameter", "Default + Spcfc")
Displays whether there is a reserved station in the network.
Displays the transmission mode of the self station. (Display
item: "Normal mode", "Constant scan XX ms"
Displays the duplex transmission setting of the self station.
(Display item: "Normal transmission", "Multiplex transmission",
*2
"-"
)
Displays the duplex transmission status of the self station.
(Display item: "Normal transmission", "Multiplex transmission",
*2
"-"
)
Displays the transmission speed of the self station. (Display
item: "10Mbps", "25Mbps")
* 1 XX represents the constant link scan setting time.
* 2 The symbol, "-" appears in the case of a coaxial bus system.
*1
)
9.4 MELSECNET/H Utility
9.4.2 Operating Module information screen
Correspon-
Correspon-
ding SB
ding SW
SW0040
SW0041
SW0042
SB0057,
SW0046
SB005A
SB0044
SB0054
SW0054
SB0064
SW0068
SB0069
SB006A
(To next page)
9
- 93
9
10
11
12
13
14
15
16
Advertisement
Table of Contents
Troubleshooting
