Mitsubishi MELSEC-Q Series User Manual page 122

4
FUNCTIONS
(6) Remote RESET methods
Remark
1) Set to "RESET".
4
- 49
4.5 Remote Operation Function
4.5.3 Remote RESET
Remote RESET can be executed by either of the following two methods: "Using user
program" or "Using development environment (personal computer)".
(a) Using user program
Execute the bus interface function (QBF_Reset function) from the user program to
perform remote RESET.
The following function is used for remote RESET.
Function name
QBF_Reset
Refer to Chapter 10 for details of the bus interface functions.
(b) Using development environment (personal computer)
On the <<Online operation>> tab of the C Controller setting utility, select "RESET"
for "Remote operation" and click the
Figure 4.41 Remote RESET from development environment (personal computer)
Table4.15 Function used for remote RESET
Resets the C Controller module in a single CPU system.
Resets the C Controller module (host) or programmable controller
CPU that is acting as No.1 in a multiple CPU system.
Execution
Description
button.
2) Click
Execution button