Mitsubishi MELSEC-Q Series User Manual page 264

9
UTILITY OPERATION
Module information
Item
Module information
LED information
Toggle switch information
CPU operation
Error code
Error information
button
Start monitor
button
Stop monitor
Drive information
Standard ROM information
CF card information
button
Update
9
- 14 9.2 C Controller Setting Utility
9.2.2 Operating Module information screen
Table9.7 Explanation of Module information screen
Event history SRAM monitor
Displays the information of the C Controller module.
Displays the LED status of the C Controller module.
Note that the CH2 SD/RD indication is invalid.
Displays the RUN/STOP/MODE switch and RESET/SELECT switch
statuses of the C Controller module.
Displays the operation status ("RUN", "STOP", "PAUSE") of the C
Controller module, including remote operation.
Displays the latest error code among the past stop/continue errors.
When a stop/continue error has occurred in the C Controller module, the
corresponding stop/continue error item changes from
(Red).
Starts monitoring.
During monitoring, this button changes to
top right of the button.
In an offline status, this button cannot be clicked.
Stops monitoring.
When monitoring is stopped, this button changes to
Displays the drive information of the C Controller module.
Displays the entire space, used space and free space of the standard
*1
ROM.
When a CompactFlash card is not installed, displays "Empty". When a
CompactFlash card is installed, displays the entire space, used space
and free space of the CompactFlash card.
Updates the "Standard ROM information" and "CF card information".
* 1 The displayed "Used space" of the "Standard ROM information" and "CF card information"
includes the size used by the file system.
Module monitor Online operation
Description
Stop monitor
*1
Reference
section
5.4 (1)
5.4 (2)
(White) to
, and "*" flashes at
.
Start monitor
4.5
18.3
18.3
7.1
7.1