Mitsubishi MELSEC-Q Series User Manual page 103

4
FUNCTIONS
(c) Link device refresh cycle setting
[Action 3: Reexamine the user program.]
Reexamine the task configuration, priority, processing details, etc. of the
user program in the C Controller module and make sure that the C
Controller system specifications and user program processing performance
are satisfied.
Set the link device refresh cycle in "Link device refresh cycle" on the <<Parameter
setting>> tab. ( Section 9.4.6 (1))
Figure 4.26 Link device refresh cycle setting
4.4 MELSECNET/H Module Access Function
Link device refresh cycle setting
4.4.4 Link device refresh setting
1
2
3
4
5
6
7
8
4
- 30