Mitsubishi MELSEC-Q Series User Manual page 311

9
UTILITY OPERATION
(b) Details of data link status
The following indicates the details of the data link status.
Display
In data link
Suspended data link
Initial status
Waiting for receiving
parameters
Disconnecting (no request
polling)
Disconnecting (link error)
Disconnecting (other)
During line test
During parameter setting test
During auto-Returning
During reset
Table9.36 Details of data link status
Description
Data link is being executed.
Data link is suspended.
In initial status (before parameter update).
Parameters have not been received.
Disconnected from data link network without inquiry
from the master station.
Disconnected from data link network due to a line error.
Disconnected from data link network due to any other
factor.
Line test is being executed.
Parameter setting test is being executed from the
master station.
Processing for automatically returning to data link
network is being performed.
CC-Link module is being reset.
9.3 CC-Link utility
9.3.2 Operating Module information screen
9
10
11
12
13
14
15
16
9
- 61